Support
Sound4u
089-9218269 , 084-5552145
Your shopping cart
ดูตะกร้าสินค้าของคุณ
ไม่มีสินค้าในตะกร้าของคุณ
จำนวนครั้งที่เปิดดูสินค้า : 2499 | ความคิดเห็น: 0

QSC รุ่น RMX5050

 เพิ่มเมื่อ: 2012-10-15 00:17:51.0
 เบอร์โทรติดต่อ: 089-9218269 , 084-5552145
 อีเมลล์: soundsiamweb@gmail.com

รายละเอียด:
เครื่องขยายเสียง 2 channels, 1100 watts/ch at 8Ω, 1800 watts/ch at 4Ω, 2500 watts/ch at 2Ω, 5000 watts/ch at 4Ω (bridged)
61000.00 บาท

ส่งอีเมลล์ให้เพื่อน

 สินค้าที่เกี่ยวข้อง

QSC รุ่น GX7 QSC รุ่น RMX850 QSC รุ่น RMX1450 QSC รุ่น GX5 QSC รุ่น GX3

 FEATURES

 

  • The new flagship of the RMX line, the RMX 5050 provides extremely high power and represents tremendous value
  • The RMX 5050 provides advanced thermal performance, delivering higher continuous power in 2-ohms stereo or 4-ohms bridged applications
  • Dual mono, high current power supply for increased reliability and performance
  • 3RU chassis only 16" deep
  • Professional quality performance - incorporates road-proven QSC designs
  • High-current toroidal transformers for greater two-ohm power and low noise
  • Independent user-defeatable clip limiters reduce distortion
  • Selectable low-frequency filters (30 Hz or 50 Hz) protect speakers and increase headroom
  • Balanced 1/4" (6.3 mm) TRS, XLR, and barrier strip inputs for maximum flexibility
  • Binding post and Neutrik Speakon outputs
  • Front mounted gain controls for easy access
  • Signal and Clip LED indicators to monitor performance

 

SPECIFICATIONS

RMX 5050

 

STEREO MODE, Both Channels Driven

8 ohms 
  FTC 20 Hz - 20 kHz, 0.1% THD
  EIA 1 kHz, 0.1% THD


1050 W
1100 W

4 ohms
  FTC 20 Hz - 20 kHz, 0.1% THD
  EIA 1 kHz, 0.1% THD


1600 W
1800 W

2 ohms 
  FTC 20 Hz-20 kHz 0.1% THD
  EIA 1 kHz 1% THD


2000 W
2500 W

 

BRIDGE-MONO MODE

8 ohms 
  FTC 20 Hz-20 kHz 0.1% THD
  EIA 1 kHz 0.1% THD


3200 W
3600 W

4 ohms 
   EIA 1 kHz 1% THD


5000 W

Distortion (SMPTE-IM)

Less than 0.02%

Distortion (Typical)
20 Hz - 20 kHz: 10 dB below rated power
1 kHz and below: full rated power


Less than 0.02%
Less than 0.02%

Frequency Response

20 Hz - 20 kHz, 8 ohms, LF filter bypassed, +0/-1 dB
5 Hz - 50 kHz, 8 ohms, LF filter bypassed, +0/-3 dB

Damping Factor

Greater than 250 @ 8 ohm

Noise (unweighted)

100 dB below rated output (20 Hz - 20 kHz, 8 ohm load)

Input Sensitivity

1.42 Vrms for 1050 watts into 8 ohms

Voltage Gain

64x (36 dB) for 8 ohm load

Input Impedance

20k ohm balanced, 10k ohm unbalanced

Controls Front:
Controls Rear:

AC power switch, Ch. 1 and Ch. 2 gain control
10-pole DIP switch featuring LF filter on/off, LF filter 30/50 Hz, Clip Limiter on/off controls for each channel and switches for selecting Stereo, Parallel, or Bridge mode. Push-button circuit breaker for each channel.

Indicators

Power-On: Green LED, Protect: Red LED
Signal -30dB: Yellow LED, Clip: Red LED

Connectors Input:
Connectors Output:

XLR female, TRS (1/4"), and barrier-strip screw terminals, each channel
Binding posts and Speakon® outputs (Ch. 1 Speakon wired for biamp)

Cooling

Continuously variable-speed fan, rear-to-front air flow

Amplifier Protection

Short circuit, open circuit, thermal, ultrasonic, and RF protection. Stable into reactive or mismatched loads

Load Protection

On/off muting, DC fault output crowbar

Power Requirements

100, 120 or 240 Volts AC (±10%) 50-60 Hz (factory configured)
120V models require 20 Amp service and are supplied with a NEMA 5-20 plug on the cordset.

Dimensions

19" (48.3 cm) wide, 5.25" (13.3 cm) tall, 15.9" (40.39 cm) overall depth

Weight

75 lbs (34.02 kg) net, 87 lbs (39.46 kg) shipping

 

guest
ชื่อ
Email
เบอร์โทรศัพท์