RYDALL MP in Action

The following case studies are just a sampling of how RYDALL MP has helped companies save money, time and equipment. For recent news about RYDALL MP and our other products, you can go to our News page!

RYDALL MP doing its part in recycling
A waste management company in Canada was experiencing problems removing contaminants from plastic containers that were being cleaned to prepare them for recycling. RYDALL MP was recommended as a solution to these problematic contaminants.
RYDALL MP approach
RYDALL MP was diluted (10:1) into the parts washer, heated to approximately 120°F and sprayed onto the contaminated plastic for approximately 1 hour, followed by a water rinse.

RYDALL MP results
Setup allowed good coverage on material passing through, cleaning each thoroughly for recycling.

RYDALL MP cuts through grease, oil and grime at power plant
A municipal power plant in the Midwest was looking for a better cleaning solution to remove grease, oil and grime from engines and parts throughout its facility. Dissatisfied with previous results from other methods, the plant agreed to try RYDALL MP.
RYDALL MP approach
Plant purchased a 55-gallon drum. After diluting the RYDALL MP solution, it was sprayed on engines and components then wiped clean.

RYDALL MP results
RYDALL MP successfully removed the oil and grease buildup quickly and proved to be more effective than previous cleaners.

Oil/carbon buildup no match for RYDALL MP
An industrial cleaning contractor in Iowa was looking for a way to remove heavy oil/carbon buildup on a mixer they had received from a tire manufacturing plant. Due to the severity of the buildup, a 1:1 mixture of RYDALL MP was recommended to tackle this job.

RYDALL MP approach
5 gallons of RYDALL MP diluted (1:1), sprayed on equipment, soaked for 20-30 minutes and rinsed with water.
Total cleaning time, including cleanup of wash bay, was 1 hour.

RYDALL MP results
Effectively cut through and removed heavy buildup in a short amount of time.